<pre id="dfbdd"></pre>

    <address id="dfbdd"></address>

    <pre id="dfbdd"><pre id="dfbdd"></pre></pre>

    <track id="dfbdd"></track>

          <noframes id="dfbdd"><pre id="dfbdd"><strike id="dfbdd"></strike></pre>
          <p id="dfbdd"></p>

          <address id="dfbdd"><strike id="dfbdd"></strike></address>

            <noframes id="dfbdd">
            LEXAN(沙伯基礎)LS1/PC(聚碳酸酯)

            LEXAN(沙伯基礎)LS1/PC(聚碳酸酯)_價格_物性_圖片_UL黃卡

            LEXAN LS1聚碳酸酯(PC)是一種UL評定HB為10/97, 建議在需要V-2等級時使用200系列.

            全國24小時銷售熱線:

            0769-83023208

            產品詳情

            ?                                                                              LEXAN(沙伯基礎)LS1/PC(聚碳酸酯)

                    沙伯基礎SABIC塑料LEXAN LS1聚碳酸酯(PC)是一種UL評定HB為10/97, 建議在需要V-2等級時使用200系列, 汽車鏡頭應用, 粘度低,紫外線穩定, 僅透明顏色。

            以下是LEXAN(沙伯基礎)LS1/PC(聚碳酸酯)物性表參數:

            SABIC Lexan? LS1(塑膠原料-聚碳酸酯-PC塑料)


            Material Notes:

            LEXAN LS1 is a low viscosity injection moulding grade especially designed for manufacturing complex parts requiring easy flow properties combined with high optical requirements.

            Physical Properties物理性質

            Metric公制數據

            English英制數據

            Comments測試方法

            Density密度 

            1.20 g/cc

            0.0434 lb/in3

            ISO 1183

            Moisture Absorption at Equilibrium吸濕平衡 

            0.15 %

            0.15 %

            23°C / 50% RH; ISO 62

            Water Absorption at Saturation吸水率 

            0.35 %
            @Temperature 23.0 °C

            0.35 %
            @Temperature 73.4 °F

            ISO 62

            Linear Mold Shrinkage, Flow線性收縮率/流動 

            0.0050 - 0.0070 cm/cm

            0.0050 - 0.0070 in/in

            on tensile bar; SABIC Method

            Melt Flow熔體流動速率 

            21 g/10 min
            @Load 1.20 kg,
            Temperature 300 °C

            21 g/10 min
            @Load 2.65 lb,
            Temperature 572 °F

            [cm^3/10 min] Melt Volume Rate; ISO 1133

            Mechanical Properties力學性能

            Metric公制數據

            English英制數據

            Comments測試方法

            Hardness,硬度 H358/30 

            95.0 MPa

            13800 psi

            ISO 2039-1

            Tensile Strength at Break斷裂拉伸強度 

            70.0 MPa

            10200 psi

            50 mm/min; ISO 527

            Tensile Strength, Yield屈服拉伸強度 

            63.0 MPa

            9140 psi

            50 mm/min; ISO 527

            Elongation at Break斷裂伸長率 

            100 %

            100 %

            50 mm/min; ISO 527

            Elongation at Yield屈服伸長率 

            6.0 %

            6.0 %

            50 mm/min; ISO 527

            Tensile Modulus拉伸模量 

            2.35 GPa

            341 ksi

            1 mm/min; ISO 527

            Flexural Yield Strength彎曲屈服強度 

            90.0 MPa

            13100 psi

            2 mm/min; ISO 178

            Flexural Modulus彎曲彈性模量 

            2.30 GPa

            334 ksi

            2 mm/min; ISO 178

            Izod Impact, Notched懸臂梁缺口沖擊強度 (ISO)  

            11.0 kJ/m2
            @Temperature -30.0 °C

            5.23 ft-lb/in2
            @Temperature -22.0 °F

            80*10*3; ISO 180/1A


            65.0 kJ/m2
            @Temperature 23.0 °C

            30.9 ft-lb/in2
            @Temperature 73.4 °F

            80*10*3; ISO 180/1A

            Izod Impact, Unnotched懸臂梁無缺口沖擊強度 (ISO) 

            NB
            @Temperature 23.0 °C

            NB
            @Temperature 73.4 °F

            80*10*3; ISO 180/1U


            NB
            @Temperature -30.0 °C

            NB
            @Temperature -22.0 °F

            80*10*3; ISO 180/1U

            Charpy Impact Unnotched夏比缺口試樣沖擊 

            NB
            @Temperature 23.0 °C

            NB
            @Temperature 73.4 °F

            Edgew 80*10*3 sp=62mm; ISO 179/1eU


            NB
            @Temperature -30.0 °C

            NB
            @Temperature -22.0 °F

            Edgew 80*10*3 sp=62mm; ISO 179/1eU

            Charpy Impact, Notched夏比缺口沖擊 

            1.20 J/cm2
            @Temperature -30.0 °C

            5.71 ft-lb/in2
            @Temperature -22.0 °F

            V-notch Edgew 80*10*3 sp=62mm; ISO 179/1eA


            6.50 J/cm2
            @Temperature 23.0 °C

            30.9 ft-lb/in2
            @Temperature 73.4 °F

            V-notch Edgew 80*10*3 sp=62mm; ISO 179/1eA

            Taber Abrasion, mg/1000 Cycles周期泰伯磨耗 

            10
            @Load 1.00 kg

            10
            @Load 2.20 lb

            CS-17; SABIC Method

            Electrical Properties電性能

            Metric公制數據

            English英制數據

            Comments測試方法

            Volume ResiSTivity體積電阻率 

            >= 1.00e+15 ohm-cm

            >= 1.00e+15 ohm-cm

            IEC 60093

            Surface Resistance表面電阻 

            >= 1.00e+15 ohm

            >= 1.00e+15 ohm

            ROA; IEC 60093

            Dielectric Constant介電常數 

            2.7
            @Frequency 1.00e+6 Hz

            2.7
            @Frequency 1.00e+6 Hz

            IEC 60250


            2.7
            @Frequency 50.0 - 60.0 Hz

            2.7
            @Frequency 50.0 - 60.0 Hz

            IEC 60250

            Dielectric Strength介電強度 

            17.0 kV/mm
            @Thickness 3.20 mm

            432 kV/in
            @Thickness 0.126 in

            in oil; IEC 60243-1

            Dissipation Factor耗散因數 

            0.0010
            @Frequency 50.0 - 60.0 Hz

            0.0010
            @Frequency 50.0 - 60.0 Hz

            IEC 60250


            0.010
            @Frequency 1.00e+6 Hz

            0.010
            @Frequency 1.00e+6 Hz

            IEC 60250

            Thermal Properties熱性能

            Metric公制數據

            English英制數據

            Comments測試方法

            CTE, linear, Parallel to Flow線性熱膨脹系數 

            70.0 μm/m-°C
            @Temperature 23.0 - 80.0 °C

            38.9 μin/in-°F
            @Temperature 73.4 - 176 °F

            ISO 11359-2

            Thermal Conductivity導熱系數 

            0.200 W/m-K

            1.39 BTU-in/hr-ft2-°F

            ISO 8302

            Deflection Temperature at熱變形溫度 0.46 MPa (66 psi) 

            133 °C

            271 °F

            Edgew 120*10*4 sp=100mm; ISO 75/Be

            Deflection Temperature at熱變形溫度 1.8 MPa (264 psi) 

            122 °C

            252 °F

            Edgew 120*10*4 sp=100mm; ISO 75/Ae

            Vicat Softening Point維卡軟化點 

            140 °C

            284 °F

            Rate B/50; ISO 306


            141 °C

            286 °F

            Rate B/120; ISO 306

            UL RTI, Electrical 相對溫度指數

            130 °C

            266 °F

            UL 746B

            UL RTI, Mechanical with Impact 機械沖擊熱指數

            125 °C

            257 °F

            UL 746B

            UL RTI, Mechanical without Impact 無機械沖擊熱指數

            125 °C

            257 °F

            UL 746B

            Flammability, UL94阻燃等級  

            HB
            @Thickness 0.750 mm

            HB
            @Thickness 0.0295 in

            UL 94


            HB
            @Thickness 3.00 mm

            HB
            @Thickness 0.118 in

            2nd value; UL 94

            Oxygen Index氧指數 

            25 %

            25 %

            LOI; ISO 4589

            Glow Wire Test灼熱絲測試 

            850 °C
            @Thickness 1.00 mm

            1560 °F
            @Thickness 0.0394 in

            Glow Wire Flammability Index; IEC 60695-2-12

            Optical Properties光學性質

            Metric公制數據

            English英制數據

            Comments測試方法

            ReFRactive Index折射率 

            1.586

            1.586

            ISO 489

            Haze霧度 

            <= 0.80 %
            @Thickness 2.54 mm

            <= 0.80 %
            @Thickness 0.100 in

            ASTM D 1003

            TRansmission, Visible透光率 

            88 - 90 %
            @Thickness 2.54 mm

            88 - 90 %
            @Thickness 0.100 in

            ASTM D 1003





            上一篇:沙伯基礎創新耐寒PC系列

            下一篇:PC GSV2030R2日本三菱

            欣隆全塑膠
            相關產品

            Related products

            推薦產品
            啊灬啊灬用力再用力岳
            <pre id="dfbdd"></pre>

              <address id="dfbdd"></address>

              <pre id="dfbdd"><pre id="dfbdd"></pre></pre>

              <track id="dfbdd"></track>

                    <noframes id="dfbdd"><pre id="dfbdd"><strike id="dfbdd"></strike></pre>
                    <p id="dfbdd"></p>

                    <address id="dfbdd"><strike id="dfbdd"></strike></address>

                      <noframes id="dfbdd">